Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the remote control battery of the Peugeot 207?

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Key
Operation: How to replace the remote control battery of the Peugeot 207?

In this tutorial we can see how to replace the Peugeot 207 remote control battery, an extremely simple and economical operation. To do this, we will need a small flat-tip screwdriver and a spare CR1620 battery. First of all, we identify the slot in the lower edge of the remote control, then insert a coin or screwdriver inside and separate the two halves by levering it. At this point, helping us again with the screwdriver, we extract the old battery and insert the spare one, obviously taking care to respect its direction.


Posted on 15 June 2022 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - Why is the key of the Peugeot 207 not working? Read Answer
    • 207 2006-2015 - Why is the key of the Peugeot 207 not working? Read Answer
    • 207 2006-2015 - How to change the battery on the key of the Peugeot 207 from 2007? Read Answer
    • 207 2006-2015 - Why does the message Electronic anti-theft fault appear in the Peugeot 207? Read Answer
    • 207 2006-2015 - What to do if you have a central locking problem on your Peugeot 307? Read Answer
    • 207 2006-2015 - What problems does the Peugeot 207 remote control have? Read Answer
    • 207 2006-2015 - What to do if the Peugeot 207 remote control no longer works? Read Answer
    • 207 2006-2015 - What to do when the Peugeot 207 key does not work? Read Answer
    • 207 2006-2015 - What to do to electronically open the trunk of the Peugeot 207? Read Answer
    • 207 2006-2015 - How to replace the remote control battery of the Peugeot 207? Read Answer
    • 207 2006-2015 - Why does the key not work on Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos