Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 208
  6. : Guide to remove the wheels on the Peugeot 208

Peugeot 208 - Video tutorial

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Wheel
Operation: Guide to remove the wheels on the Peugeot 208

In this short guide we will see the instructions that will allow us to remove and replace the wheels on the Peugeot 208 first series, but also on the 308 and on 2008. First of all, you need to take the wheel replacement kit (jack, key and spare wheel) , which we find in the luggage compartment; then remove the caps from the bolts and proceed to remove the safety bolt (if present) with the special bush supplied. At this point we loosen all the other screws of the wheel; we lift the car and finish unscrewing the screws, thus replacing the wheel with the spare one. The video shows a disassembly method if the bolt is stripped.


Posted on 20 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos