Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Add or Change the AdBlue Fluid on the Peugeot Partner 1.6 HDI

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013

In this video, we will cover the main instructions for replacing the AdBlue bag on the first series Peugeot Partner Tepee with a 1.6 HDI Euro 5 engine. First, lift the vehicle and start by removing the protective cover of the AdBlue container; then remove the old bag by disconnecting the pipe, as shown in the video. At this point, insert the new bag, connecting the pipe to circulate the new fluid; finally, reattach the metal cover and reassemble everything, following the video to the end!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Turbocharger on a Peugeot Partner Tepee 1.6 HDI
How to Dismantle the Turbocharger on a Peugeot Partner Tepee 1.6 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) In today's tutorial, you will learn how to dismantle the turbocharger on a Peugeot Partner Tepee with a 1.6 HDI engine. First, open the bonnet and di…
Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) This guide shows you the main steps to remove and replace the clutch cable on the Peugeot Partner Tepee 2.0 HDI. First, raise the vehicle and disconn…
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Peugeot Partner Tepee (2008-2018 / B9) Today's information will show you how to remove and replace the timing belt on the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. Fi…

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the horn relay located on the Peugeot Partner? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos