How to Program the Remote Control for the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key

Programming the remote control for your car may seem like a complex task that cannot be done independently. In reality, it is simpler than you might think, and you only need a specific programmer that is easily available in specialist shops or online. To begin, sit in the driver's seat and insert the key without turning it. Turn on the programmer and select your geographical area, the make of the car, and of course, the model and year of manufacture. At this point, you will be asked to turn the key. After doing so, a confirmation message will be displayed. Next, turn off the ignition. Finally, turn the key again and hold it for ten seconds. After this, simply press the button to lock the doors and wait two minutes. Once the confirmation message appears, you can unlock the doors, and the programming is complete.

Updated on 3 June 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Key - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Seat - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!

by ScegliAuto

How to Program the Remote Control for the Peugeot 206

Related tutorials

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

More videos