Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spare Wheel from the Peugeot 5008?

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Wheel

In this tutorial, see how to remove the spare wheel from the Peugeot 5008, so you can replace it or use it in case of a puncture. First, open the boot of the luggage compartment, then lift the two floor panels and retrieve the necessary tools, namely the wheel bolt removal key and the extension. Next, locate the bolt on the right side and unscrew it with the mentioned tools until the spare wheel is completely on the ground. Finally, disconnect it from the cord and proceed to use it as needed.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is and how to remove the spare wheel of a Peugeot 5008?
Where is and how to remove the spare wheel of a Peugeot 5008?
Peugeot 5008 (2017-2024 / MK 2) The spare wheel of a Peugeot 5008 is located under the rear of the car. To remove it, you must lift the third row of seats to access the fixing bolt …
Guide to Replacing the Spare Wheel on the Peugeot 5008
Guide to Replacing the Spare Wheel on the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) These brief and simple steps illustrate the process of removing and replacing the wheel with the spare on the Peugeot 5008. First, open the rear tail…
Guide to Replacing the Wheel with the Spare on a Peugeot 5008
Guide to Replacing the Wheel with the Spare on a Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) Let’s briefly go through the instructions to remove and replace the wheel with the spare on a Peugeot 5008, as well as on a 3008. First, open the boo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos