Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace the Peugeot 3008 key battery

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: Key
Operation: How to replace the Peugeot 3008 key battery

If the battery of our remote control key is exhausted, in the description and in the video that follows we have summarized the steps necessary to replace the battery correctly. First you need to buy a CR 2032 battery and then remove the emergency key. Take a pointed object to remove the key back cover. In this way we access the battery that we can remove and replace with the new one, respecting the direction of the polarity. Then close the lid and insert the emergency key again and that's it.


Posted on 5 August 2022 by ScegliAuto

    Frequently Asked Questions

    • 3008 2009-2016 - Why doesn't the Peugeot 3008 key work? Read Answer
    • 3008 2016-2023 - What to do if the ECU does not detect the key on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the key of the Peugeot 3008 not detected? Read Answer
    • 3008 2016-2023 - What to do when the key not recognized message appears on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What to do if the Peugeot 3008 does not detect the key? Read Answer
    • 3008 2016-2023 - Why does the keyless remote control of the Peugeot 3008 no longer work? Read Answer
    • 3008 2016-2023 - Why does the Peugeot 3008 remote control not work? Read Answer
    • 3008 2016-2023 - Why does the remote control of the Peugeot 3008 not work? Read Answer
    • 3008 2009-2016 - How to replace the battery in the key of a Peugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos