Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Battery

Follow these instructions to remove and replace the battery of the Peugeot 3008 in simple steps. First, open the bonnet and disconnect both battery terminals (positive and negative); then, undo the bolt of the bracket located at the bottom using a socket spanner with an extension, as shown in the video. At this point, remove and replace the battery with a new one of the correct type and with the same amperage; then install it in the correct orientation and connect the battery.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of a Peugeot 3008
How to Replace the Battery of a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Remove the battery from the Peugeot 3008. Here’s how to remove the damaged battery from inside the compartment. Open and lift the bonnet. You will fi…
How to Replace the Remote Battery of the Peugeot 3008?
How to Replace the Remote Battery of the Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the remote battery of the Peugeot 3008, use a tool to lever open the groove located at the bottom of the device: this will allow you to se…
How to Replace the Battery on a Peugeot 3008?
How to Replace the Battery on a Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the battery on a Peugeot 3008, open the bonnet to access the components inside the engine bay. On the right side, just below the windscree…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos