Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the ADBLUE Warning Light in a Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: AdBlue warning light

See other generations:
Video tutorial

In this video, you will learn how to reset the ADBLUE warning light in a Peugeot 508. The cap for the additive tank is located under the mat: to access it, lift the mat and the spare wheel, which is positioned beneath the mat itself. You can now proceed to top up the ADBLUE using a funnel to avoid spilling the contents.

Once you have topped up the ADBLUE, sit in the driver's seat, put the gear in neutral, and turn on the ignition. The warning light should now be off; sometimes it may take a few minutes.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Peugeot 508 (2010-2018 / MK 1) Today's guide will show you the steps to deactivate the AdBlue warning light on the Peugeot 508, following the instructions below. First, top up the …
Peugeot 508 (2010-2018 / MK 1) These brief and simple steps will show you how to disable the AdBlue refill warning light on the Peugeot 508, as well as on other models from the man…
Peugeot 508 (2010-2018 / MK 1) Follow this guide to reset the AdBlue warning light on the Peugeot 508. First, get into the vehicle and turn on the ignition. Connect your diagnostic…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos