Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the AdBlue warning light on the Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: AdBlue warning light

These short and simple steps will show us how to deactivate the warning light for topping up the AdBlue liquid in the Peugeot 508, as well as in other models of the manufacturer. First, we get into the car and start the instrument panel; then we connect our diagnostic tool to the OBD socket of the ECU, in order to communicate with it, as shown in the video. At this point, we follow the guided procedure by searching for errors on the car, confirming and performing the reset, following the video tutorial until the end!

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the AdBlue warning light on the Peugeot 508
How to deactivate the AdBlue warning light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Today's guide will show us the steps that will allow us to deactivate the AdBlue warning light of the Peugeot 508, following the instructions below. …
How to Disable the ADBLUE Warning Light in a Peugeot 508
How to Disable the ADBLUE Warning Light in a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this video, you will learn how to reset the ADBLUE warning light in a Peugeot 508. The cap for the additive tank is located under the mat: to acce…
How to Reset the AdBlue Warning Light on the Peugeot 508
How to Reset the AdBlue Warning Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Follow this guide to reset the AdBlue warning light on the Peugeot 508. First, get into the vehicle and turn on the ignition. Connect your diagnostic…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos