Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the AdBlue warning light on the Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: AdBlue warning light

Today's guide will show us the steps that will allow us to deactivate the AdBlue warning light of the Peugeot 508, following the instructions below. First, we top up the fluid to the maximum level, in order to proceed with the reset; then we connect our diagnostic tool and select the brand, model, and engine, as shown in the video. At this point, we follow the indicated procedure to deactivate the AdBlue warning light, resetting it from the instrument panel; then we disconnect the diagnostic tool, following the video tutorial until the end!

Posted on 3 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the AdBlue warning light on the Peugeot 508
How to deactivate the AdBlue warning light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) These short and simple steps will show us how to deactivate the warning light for topping up the AdBlue liquid in the Peugeot 508, as well as in othe…
How to Disable the ADBLUE Warning Light in a Peugeot 508
How to Disable the ADBLUE Warning Light in a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this video, you will learn how to reset the ADBLUE warning light in a Peugeot 508. The cap for the additive tank is located under the mat: to acce…
How to Reset the AdBlue Warning Light on the Peugeot 508
How to Reset the AdBlue Warning Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Follow this guide to reset the AdBlue warning light on the Peugeot 508. First, get into the vehicle and turn on the ignition. Connect your diagnostic…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos