Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on Peugeot 205

Model: Peugeot 205 MK 1 - Years 1983-1999
Part: Brake pads

This brief and simple guide shows how to remove and replace the front brake pads on a Peugeot 205, following the instructions below. First, lift the vehicle and start loosening the wheel bolts to remove the wheel. Then, unscrew the bolts of the front brake caliper, removing it from the bracket as shown in the video. At this point, remove the old brake pads, cleaning the caliper of any residual dirt. Install the new high-quality brake pads, applying the reverse procedure for reassembly!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Shoes on a Peugeot 205
Replacing the Rear Brake Shoes on a Peugeot 205
Peugeot 205 (1983-1999 / MK 1) Learn how to replace the rear drum brake shoes on a Peugeot 205. Lift the car on a column lift and remove the wheel to access the brake drum. Once th…
How to Replace the Front Headlight and Bulbs on the Peugeot 205
How to Replace the Front Headlight and Bulbs on the Peugeot 205
Peugeot 205 (1983-1999 / MK 1) The instructions in this guide will show you how to remove and replace the front headlight and its bulbs on the Peugeot 205. First, open the bonnet o…
How to Replace the Rear Bumper Trim on a Peugeot 205
How to Replace the Rear Bumper Trim on a Peugeot 205
Peugeot 205 (1983-1999 / MK 1) Today, you will learn how to replace the rear bumper trim on a Peugeot 205. To perform the replacement, remove the vehicle's badge using a knife or a…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos