Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : What is the Peugeot 2008 fuse scheme?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Fuse box
Operation: What is the Peugeot 2008 fuse scheme?

In this video we can see the position of the fuse boxes, and the relative diagrams, of the Peugeot 2008, useful in case we need to check the fuse of a malfunctioning device. As shown, in this model we find three boxes: the first is located behind the door located under the dashboard, on the driver's side; the second is located behind the glove compartment, on the passenger side; the third box is finally positioned inside the engine compartment, just to the right of the battery. Remember to replace a damaged fuse with a spare of the same amperage.


Posted on 25 September 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Where are the fuses located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Where can I find the fuse diagram for the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the blower fuse located on a Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the cooling fan relay located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Where is the touch screen fuse located on Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where are the fuse boxes located on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the Peugeot 2008 passenger compartment fan fuse located? Read Answer
    • Peugeot 2008 2013-2019 - Where is the Peugeot 2008 cooling fan fuse located? Read Answer
    • Peugeot 2008 2013-2019 - Where are the fuses located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where are the fuses of a 2008 Peugout located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos