Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot Expert

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light (oil change) on a Peugeot Expert 2018/2020. First, close all four doors, pull the handbrake, and insert the key into the ignition without turning it on. Now, press the button to the right of the speedometer, where a spanner icon is displayed.

Press and hold it while turning on the ignition - but without starting the engine - at this point, a countdown will start on the central display from ten. When the countdown reaches zero, the reset will be complete and you can release the button.

Turn off the ignition and turn it back on. The light will be off.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on Peugeot Expert 3
How to Reset the Service Light on Peugeot Expert 3
Peugeot Expert (2016-2025 / Mark3, MK 3) If you own a third series Peugeot Expert and the service light continues to appear on the instrument panel even after performing the vehicle service,…
How to Reset the Service Light on the Peugeot Expert?
How to Reset the Service Light on the Peugeot Expert?
Peugeot Expert (2008-2016 / Mark2, MK 2) To reset the service light on the Peugeot Expert, press and hold the button located on the right side of the instrument panel while it is off. Next, …
How to Reset the Service Light on a 2018 Peugeot Expert
How to Reset the Service Light on a 2018 Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) On all Peugeot vehicles, the procedure to reset the service light is similar. To reset the service light on a 2018 Peugeot Expert, first keep the ins…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos