Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Dismantling the Centre Console of the Peugeot 107 - Citroen C1

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Center console tunnel

Video tutorial

This guide outlines the main steps to dismantle and replace the centre console of the Peugeot 107 and Citroen C1. First, get in the vehicle and start by removing the two side plastics found at the bottom of the dashboard (where the air vents are located); then unscrew the fastening screws of the centre tunnel, which are at the back, to remove the plastic.

At this point, replace the centre console with the new one, applying the reverse procedure for reassembly!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Time on a Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) This tutorial shows how to adjust the time on a Peugeot 107, a very simple and quick operation to perform, for example, if you have disconnected the …
How to Remove the Car Radio in the Peugeot 107
How to Remove the Car Radio in the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) .. This tutorial also applies to the sister models Citroen C1 and Toyota Aygo of the first generation. First, detach the central knob, which hides a screw.. …
How to Replace the Window Seal on the Citroen C1 - Peugeot 107
How to Replace the Window Seal on the Citroen C1 - Peugeot 107
Peugeot 107 (2005-2014 / MK 1) .. window seal on the Peugeot 107, as well as the Citroen C1 and Toyota Aygo. First, open the front door and carefully pull out and remove the entire.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos