Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Procedure for Replacing a Spark Plug

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Spark plugs

This short video tutorial shows how to remove and replace a spark plug from the engine of a Peugeot 206. After opening the bonnet and locating the spark plug to be changed, obtain a ratchet with a suitable socket and extension (as the spark plug head is not easily reachable with a standard socket). Next, proceed to unscrew the spark plug, using your hands as needed. Continue unscrewing with the socket until you can finish the operation with your fingers. Finally, pull out the old spark plug from above and proceed with its replacement.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Spark Plug Replacement
Instructions for Spark Plug Replacement
Peugeot 206 (1998-2012 / MK 1) Replacing spark plugs is an extremely simple operation that does not require special precautions. It is recommended to perform this maintenance with …
Instructions for Replacing Glow Plugs
Instructions for Replacing Glow Plugs
Peugeot 206 (1998-2012 / MK 1) It is recommended to perform this maintenance with a cold engine since the glow plugs are directly fixed to the cylinder head. Before proceeding with…
Instructions for Removing Ignition Coils
Instructions for Removing Ignition Coils
Peugeot 206 (1998-2012 / MK 1) If the engine struggles to start or runs unevenly after ignition, it is likely that a spark is not firing correctly in one of the cylinders due to a …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos