Instructions for Replacing Glow Plugs

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Glow plugs

This video is currently unavailable

It is recommended to perform this maintenance with a cold engine since the glow plugs are directly fixed to the cylinder head. Before proceeding with the removal, blow compressed air around the glow plug seats to remove any dirt that could enter the cylinders during the removal of the glow plugs.

Then, undo the nut securing the glow plug feed eyelet and then the glow plug itself using a socket wrench. To remove one of the glow plugs, it is necessary to remove a support bracket, also disconnecting the fuel filter pipes.

Apply grease to the threads of the new glow plugs and proceed in reverse for installation.

Updated on 13 February 2026 by ScegliAuto

Other guides you may be interested in

Fuel Filter - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Seat - Maintenance and repair on other vehicles

Cylinder Head - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Instructions for Replacing Glow Plugs

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos