Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Glow Plugs on Peugeot 206 1.4 HDI

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Glow plugs

In this video tutorial, follow the instructions to remove and replace the glow plugs on a Peugeot 206 HDI engine. First, open and lift the bonnet of your car and remove the screws from the air filter cover; then, unclip the side levers and unscrew the screws of the airbox to remove it. At this point, disconnect the side electrical connector from the intake hose and access the rear of the engine block (where the glow plugs are located); simply unscrew them using a socket wrench with an extension and replace them!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs in a Peugeot 206?
How to Replace the Spark Plugs in a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) As we can see in this tutorial, replacing the spark plugs in a Peugeot 206 is a very simple task within anyone's reach. First, ensure that the key is…
Replacing Spark Plugs on Peugeot 206
Replacing Spark Plugs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's replace the spark plugs in a Peugeot 206 petrol engine. Lift the front bonnet to access the spark plugs; start by removing the coil bar located…
Removing the Spark Plugs on a Peugeot 206
Removing the Spark Plugs on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s look at removing the spark plugs on a Peugeot 206. Pull the lever to open the engine compartment and lift the front bonnet; remove the soundpro…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos