Do it yourself
Frequently asked questions about cars and motorcycles

Where is the Horn Located on the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance

In this video, you can see where the horn is located on the Peugeot 206 and how to proceed if you need to replace it. As shown, it is positioned just behind the bumper, in front of the radiator. To access it for removal, you will need to lift the front of the vehicle, taking all necessary safety precautions. The horn is secured to the frame with a single bolt that can be undone with a 13 mm socket. Once removed, you can disconnect the power connector and follow the reverse procedure to install the replacement.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Want to remove the horn on a Peugeot 206? Follow this guide for disassembly in the instructional video. Open the engine bonnet by pulling the release…
Peugeot 206 (1998-2012 / MK 1) In a few simple steps, we will see how to disassemble and replace the horn or acoustic warning device of the Peugeot 206 and 206 SW. First of all, le…
Peugeot 206 (1998-2012 / MK 1) In today's video, you will see how to remove the driver's airbag and, consequently, the horn button on a Peugeot 206 by following these simple instru…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos