Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : Where is the airbag control module located in the Peugeot 3008?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: Airbags
Operation: Where is the airbag control module located in the Peugeot 3008?

In this video we can see where the airbag control module is located in the Peugeot 3008, useful for example in case we need to replace it. As shown, it is positioned inside the passenger compartment, precisely under the central tunnel just behind the handbrake lever. To disassemble it we will therefore have to remove the tunnel cover by removing the relative screws, then unscrew the three module fixing bolts and finally disconnect the connector. Make sure you carry out the operation with the vehicle off, so as not to cause any damage.


Posted on 23 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos