Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 2008
  6. : How to replace rear light bulbs in Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Rear light bulb
Operation: How to replace rear light bulbs in Peugeot 2008?

Replacing the rear light bulbs in the Peugeot 2008, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, let's make sure that the key is not inserted in order to operate in complete safety. Let's start by opening the tailgate, then remove the panel located at the rear of the headlight in question, locate the plastic nut and unscrew it. Then grab the light, pull it outwards and separate it from the bodywork. At this point we can disconnect the connector, unlock the back plate and proceed to replace the faulty bulb.


Posted on 26 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos