Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Peugeot Expert Van?

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, you will see how to replace the radio in a Peugeot Expert van, a very simple and quick operation. First, ensure the vehicle is turned off, then carefully pry off the entire trim of the centre console using a plastic spatula.

Next, unscrew all the screws securing the console, disconnect the various connectors, and proceed to remove the internal radio module. At this point, insert the replacement, make the necessary connections as indicated in its manual, and follow the reverse procedure to reassemble everything.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Where is the battery located in the Peugeot Expert van?
Where is the battery located in the Peugeot Expert van?
Peugeot Expert (2008-2016 / Mark2, MK 2) In this video, you can see where the battery is located in the Peugeot Expert van, useful if you need to replace it, a very simple and quick operatio…
What is the fuse diagram for the Peugeot Expert van?
What is the fuse diagram for the Peugeot Expert van?
Peugeot Expert (2016-2025 / Mark3, MK 3) In this video, we can see where the fuse boxes of the Peugeot Expert van are located and what their diagrams are, useful in case we need to check the…
How to Remove and Replace the Radio in the Peugeot Expert
How to Remove and Replace the Radio in the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) In this guide, you will find instructions to remove and replace the factory radio in the Peugeot Expert, as well as in the Fiat Scudo. First, get ins…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos