Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Rcz
    4. : Timing belt replacement interval on Peugeot Rcz

Peugeot Rcz - Video tutorial

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Timing belt
Operation: Timing belt replacement interval on Peugeot Rcz

One of the most important maintenance operations to carry out on your car is certainly changing the timing belt. Motorists often forget to check or tend to underestimate the importance of replacing the timing belt as it is an operation that is performed over a rather long interval. The timing belt is a toothed belt, made of elastic material, which connects the upper part of the engine with the lower one. Synchronize the correct operation of the crankshaft with the camshaft. The timing belt is usually located on the right side of the engine, but can vary depending on the manufacturer and model. All the use and maintenance manuals of every modern car show this information, expressed in kilometers or years, within which the timing belt must be changed.


Posted on 26 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Rcz 2010-2015 - How many km do you replace the Peugeot RCZ timing belt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos