Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on the Peugeot RCZ

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Headlight

In this brief guide, discover the steps to remove and replace the front headlamp on the Peugeot RCZ, as well as on the 207, 308, and first-generation 3008. First, open the bonnet and start by removing the plastic trim above the front bumper; then, unscrew the screw located under the headlamp, also removing the upper screws. At this point, disconnect the electrical connector for the bulbs to completely remove the front headlamp. Apply the reverse procedure for reassembly!

Updated on 21 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Headlamp Bulb on a Peugeot RCZ
How to Replace the Front Headlamp Bulb on a Peugeot RCZ
Peugeot Rcz (2010-2015 / MK 1) To replace the front headlamp bulb on a Peugeot RCZ, open the bonnet to access the components inside the engine bay. Here, you will find the internal…
How to replace the rear headlight bulb of the Peugeot RCZ
How to replace the rear headlight bulb of the Peugeot RCZ
Peugeot Rcz (2010-2015 / MK 1) In this new mini guide, we will guide you step by step in replacing the rear headlight bulb of your Peugeot RCZ. First of all, you must make sure to …
How to remove the front bumper on the Peugeot RCZ?
How to remove the front bumper on the Peugeot RCZ?
Peugeot Rcz (2010-2015 / MK 1) In this tutorial we can see how to remove the front bumper on the Peugeot RCZ, an extremely simple and fast operation. First of all, we lift the fron…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos