Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Rcz
    4. : How do you replace the front headlight bulb of the Peugeot RCZ?

Peugeot Rcz - Video tutorial

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Headlight bulb
Operation: How do you replace the front headlight bulb of the Peugeot RCZ?

In order to replace the headlight bulb of the Peugeot RCZ, you need to open the hood so that you can access the components located inside the engine compartment: here you will find the inner cover of the optical group. This cover can now be removed from its housing, so that you can access the bulb inside the headlight: you will need to disconnect it from the corresponding connector. At this point, you can connect the new bulb, close the headlight, and check that everything is working properly.


Posted on 1 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos