Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 107
  6. : How to remove the plastic trim from the upper pillar of a Peugeot 107

Peugeot 107 - Video tutorial

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Bodywork
Operation: How to remove the plastic trim from the upper pillar of a Peugeot 107

Let's see how to remove the plastic trim from the upper pillar of a Peugeot 107; but the same procedure is also valid for Citroen C1 AND Toyota Aygo. First we unfold the seat. Here we have a screw and a plastic rivet; now we can remove the riser by removing the clips that hold it. We will have to remove a screw and a clip at the bottom of the upright to free it in order to pull it away. At this point we can do our operations, perhaps on the rear seat belts. To reassemble it, all we have to do is screw the screw back in and put the rivet in its place, and then proceed to the other side.


Posted on 6 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos