Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Display Bulb on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Instrument panel light

If you find that the bulbs in the display at the centre of the dashboard of the Peugeot 206 have blown, replace them as soon as possible. Release the plastic cover by applying pressure to the top edge. Now unscrew the two Torx screws at the base of the display. You can then remove the block from its housing and access the back where the three bulbs are located. Rotate the bulb holders, replace the faulty bulbs, and put them back in their sockets. Reinsert the block into its housing and secure it with the two screws, then replace the cover and lock it in place.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Display Bulb in a Peugeot 206
How to Replace the Display Bulb in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide, you will learn how to replace the display bulbs in a Peugeot 206. First, turn off the ignition. Next, take a flathead screwdriver and …
How to replace the turn signal bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Fortunately, replacing the front turn signal bulb of your Peugeot 206 is a very simple operation, so all you have to do is follow the steps described…
How to Replace the Bulb on a Peugeot 206
How to Replace the Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlight bulbs on a Peugeot 206 is a simple task that can be done independently. Start with the left headlight bulb. First, remo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos