Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Peugeot 208

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: Service warning light

If, after performing the regular service on your Peugeot 208 second series (2019-2023), you notice that the warning light continues to appear on the instrument cluster, you must proceed with a manual reset. Here's how to do it. First, get into the car and ensure it is completely off. Next, locate and hold down the "ODO" button located below the display of the instrument cluster. At the same time, turn on the ignition and wait for ten seconds. Finally, release the "ODO" button, and the warning light reset is complete.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Peugeot 208 2022
How to Reset the Service Light on the Peugeot 208 2022
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) If you own a Peugeot 208 second generation (2022) and want to know how to correctly reset the service light, simply read this guide and follow the br…
How to reset the service light on the Peugeot 208
How to reset the service light on the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) Manually resetting the service light of your second series Peugeot 208 is really very simple. To complete the procedure correctly, just follow the st…
How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to acc…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos