Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Speed Sensor

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

This video is currently unavailable

The speed sensor is located on the gearbox: to replace it, it is advisable to let the engine cool down as you will need to reach into a tight space. Lift the vehicle on suitable axle stands to facilitate access under the floor pan and remove the splash cover.

Locate the speed sensor on the gearbox, near the output of the driveshaft. Disconnect the connector by pressing on the metal clip, unscrew the mounting bolts of the sensor, and remove it from its location.

Attach the gear to the new sensor and proceed with the installation in reverse order.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacement of Speed Sensor
Replacement of Speed Sensor
Peugeot 206 (1998-2012 / MK 1) It is recommended to perform this repair with the engine cold as you will need to place your hands in a somewhat uncomfortable position: the speed se…
Replacing the External Temperature Sensor on a Peugeot 206
Replacing the External Temperature Sensor on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the temperature sensor from a Peugeot 206? Let’s look at removing the sensor from inside the engine bay. Lift the front bonnet of the c…
How the On-Board Computer Works in the Peugeot 207
How the On-Board Computer Works in the Peugeot 207
Peugeot 206 (1998-2012 / MK 1) The on-board computer in the Peugeot 207 is an integrated system that provides a range of useful information and functions for the driver. The on-boa…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos