Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Service warning light

In this tutorial, you will see how to reset the service on a Peugeot 206, an extremely simple and quick operation that should only be performed after completing all required scheduled maintenance tasks. First, sit inside the cabin, then insert the key but leave it in the initial position. Next, press and hold the button located between the speedometer and the fuel gauge, turn on the ignition, and keep the button pressed for the entire duration of the countdown displayed. Verify that the operation was successful by restarting the vehicle.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The procedure to reset the service light on a Peugeot 206 is simple and quick. To reset the service light, insert the key into the ignition without t…
How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Performing a manual reset of the service light on your Peugeot 206 is quite simple, and with the steps described below, you will be able to complete …
How to Reset the Service on Peugeot 206
How to Reset the Service on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) .. In this video tutorial, you will see how to reset the service on a Peugeot 206 by following a few simple steps that will guide you towards.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos