Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Door Pull Rod on a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Car door

To replace the door pull rod on a Peugeot 206, completely remove the door panel to access the underlying components. By moving the underlying fabric covering, loosen the bolts that secure the pull rod to the inside of the door. Next, unscrew the bolts that secure the pull rod to the inside of the door pillar; this will allow the old pull rod to be completely removed and the new replacement part to be installed securely.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…
Peugeot 206 (1998-2012 / MK 1) You can replace the rear headlight bulb of the Peugeot 206 by opening the rear hatch to access the components inside the trunk. On its side, you will…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos