Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Peugeot 2008

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

As shown in the video, the first thing before removing the battery from a Peugeot 2008 is to obtain a new battery. Turn off the engine and pull up the handbrake, then open the bonnet and prop it up. Keep it raised with the support rod. The battery is located to the right of the engine, on the driver's side.

Lift the cover above the battery secured with two tabs. You will find two bolts that need to be removed with a 10 mm spanner, and you will need to disconnect the two electrical cables.

Remove the entire box as shown in the video, then unclip the positive terminal at the front and remove the battery cover. Also, remove the bolt on the inside and the one on the side.

Now you can lift the battery and replace it with a new one.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Peugeot 2008 1.2 Puretech
How to Replace the Battery in a Peugeot 2008 1.2 Puretech
Peugeot 2008 (2013-2019 / MK 1) Today, discover the procedure and instructions to remove and replace the battery in your Peugeot 2008 1.2 Puretech. First, open the bonnet of the veh…
How to Remove the Battery from a Peugeot 2008
How to Remove the Battery from a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Before you begin, open the bonnet of your Peugeot 2008. Start by disconnecting the connectors of the control units located near the battery, then unc…
Replacing the Battery in a Peugeot 2008 1.2 Puretech
Replacing the Battery in a Peugeot 2008 1.2 Puretech
Peugeot 2008 (2013-2019 / MK 1) This video shows how to remove and replace the battery in a first-generation Peugeot 2008, following these simple steps. First, open the bonnet and r…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos