Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Battery

Before you begin, open the bonnet of your Peugeot 2008. Start by disconnecting the connectors of the control units located near the battery, then unclip and remove the control units. Next, unclip and remove the upper cover of the battery. This will give you access to the exhausted battery. Proceed to loosen the nuts securing the two terminals, then disconnect them. At this point, unscrew and remove the bolts that secure the battery to its supports, and you will have successfully completed the removal.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Peugeot 2008 1.2 Puretech
How to Replace the Battery in a Peugeot 2008 1.2 Puretech
Peugeot 2008 (2013-2019 / MK 1) Today, discover the procedure and instructions to remove and replace the battery in your Peugeot 2008 1.2 Puretech. First, open the bonnet of the veh…
How to Remove the Battery from a Peugeot 2008
How to Remove the Battery from a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) As shown in the video, the first thing before removing the battery from a Peugeot 2008 is to obtain a new battery. Turn off the engine and pull up th…
Replacing the Battery in a Peugeot 2008 1.2 Puretech
Replacing the Battery in a Peugeot 2008 1.2 Puretech
Peugeot 2008 (2013-2019 / MK 1) This video shows how to remove and replace the battery in a first-generation Peugeot 2008, following these simple steps. First, open the bonnet and r…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos