Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Battery from a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Battery

Is the power battery on your Peugeot 2008 damaged? Here’s how to remove it. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet, disengaging the lock lever with your fingers. Once the engine compartment is open, you will find the battery. Remove the cover to access the battery removal. Unscrew the battery terminal securing bolts, then remove the battery from the engine compartment and replace it with a new one (same voltage). Close the bonnet after maintenance. Start the engine and test the 2008.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Battery from a Peugeot 2008
How to Remove the Battery from a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Before you begin, open the bonnet of your Peugeot 2008. Start by disconnecting the connectors of the control units located near the battery, then unc…
How to Remove the Door Panel on a Peugeot 2008
How to Remove the Door Panel on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How to remove the door panel on a Peugeot 2008? Don’t worry, before starting the disassembly work, disconnect the battery terminals located in the en…
How to replace the battery of the Peugeot 2008
How to replace the battery of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) If the battery of your first series Peugeot 2008 is experiencing serious malfunctions or is discharging too quickly, then you have no choice but to f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos