Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Tunnel of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Center console tunnel

Below are the instructions to remove and replace the centre tunnel of the Peugeot 207, following these simple steps. First, get inside the vehicle and start by removing the plastic covers found on the side of the central instrumentation; then unscrew the fixing screws located at the bottom on the sides, as shown in the video. At this point, unscrew the screw located in the cup holder of the centre tunnel, detaching and completely removing the centre tunnel, applying the reverse procedure for reassembling the components!

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the ESP from the ECU of a Peugeot 207
How to Disable the ESP from the ECU of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video, learn how to manually disable the ESP from the ECU located in the centre tunnel of a Peugeot 207. Remove the central plastic cover on …
How to Remove the Gear Knob on a Peugeot 207
How to Remove the Gear Knob on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you remove the gear knob on a Peugeot 207? Here’s how to proceed with the replacement: first, disconnect the leather gaiter frame (if to be re…
Removing the Gear Knob on 207
Removing the Gear Knob on 207
Peugeot 207 (2006-2015 / MK 1) Remove the gear knob from the gear lever. This is an easy operation, follow these steps. Disconnect the gaiter frame from the plastic trim on the cen…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos