Do it yourself
| ||||
|
Peugeot 308 - Video tutorial
Model: Peugeot 308
MK 1, T7
- Years 2007-2014 Today's guide will show us the main steps on how to disassemble and replace the cabin fan of the Peugeot 308, following the instructions below. First, we get into the car and start by removing the glove compartment, unscrewing all the fixing screws; then we disconnect the electrical connectors located on the back, as shown in the video. At this point, we rotate the cabin fan located behind the glove compartment, disconnect its electrical wiring to remove it and replace it with the new one, applying the reverse procedure!
Posted on 23 June 2023 by ScegliAuto
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |