Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How do you program the key for the Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Key
Operation: How do you program the key for the Peugeot 2008?

In order to program the key of the Peugeot 2008, you need to use a specific programming device: this device must be inserted into the OBD port of the vehicle. The port is located on the lower left side of the dashboard, relative to the steering column. Once the device is inserted, you will be able to press all the buttons on the device. By doing so, the remote control will be associated with the car and you will be able to use all its commands. After the association is complete, you can remove the device from the OBD port.


Posted on 7 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Why is the key not detected in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Why doesn't the Peugeot 2008 key work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos