Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Peugeot 3008?

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Battery

Replacing the battery in the Peugeot 3008 is a straightforward task; here's how to proceed in this tutorial. First, ensure the key is not inserted for safety, then open the bonnet and remove the plastic bracket located at the front bottom side of the battery. Next, unscrew the earth bolt, disconnect both terminals starting with the negative, and move the control unit to access the fixing bolt located underneath it. At this point, you can extract the battery, insert the replacement, and reassemble everything.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Battery on Peugeot 3008
Replacing Battery on Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the battery on a Peugeot 3008? Remove the old battery and install a new one. Open the car door and pull up the engine compartment release l…
How to Replace the Remote Battery of the Peugeot 3008?
How to Replace the Remote Battery of the Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the remote battery of the Peugeot 3008, use a tool to lever open the groove located at the bottom of the device: this will allow you to se…
How to Replace the Battery of a Peugeot 3008
How to Replace the Battery of a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Remove the battery from the Peugeot 3008. Here’s how to remove the damaged battery from inside the compartment. Open and lift the bonnet. You will fi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos