Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the ECU of the Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Control unit

To replace the ECU of the Peugeot 3008, you need to open the hood so that you can locate the device in the upper right part, immediately below the windshield. Once it has been located, you will need to loosen the screws that hold it to its housing so that you can then disconnect the connectors: at this point, it will be possible to insert the new ECU into its seat so that it is properly programmed. At the end of the programming, you will need to start the engine and verify that everything is working.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2016-2023 / MK 2, P84) In this tutorial, you can see where the engine ECU is located in the Peugeot 3008 Hybrid, useful if you need to replace it. As shown, the ECU is posi…
Peugeot 3008 (2016-2023 / MK 2, P84) In order to reset the EAT6 automatic gearbox of the Peugeot 3008, you need to open the hood so that you can access the components inside the engine c…
Peugeot 3008 (2016-2023 / MK 2, P84) To reset the BSI unit of the Peugeot 3008, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboa…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos