Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cigarette Lighter from the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Cigarette lighter

To replace the cigarette lighter in the Peugeot 206, first open the bonnet and disconnect the negative terminal of the battery. Then, inside the cabin, unclip the clips securing the gear knob to gain access to its housing. Using your hands, lever it out to extract the cigarette lighter and the orange sleeve that surrounds it, disconnecting the device. After removal, insert the new sleeve into its housing, connect the new cigarette lighter to the connector, and refit the gear knob.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Cigarette Lighter Socket on Peugeot 206
Replace Cigarette Lighter Socket on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To begin, remove the gear knob by simply pulling it off with your fingers (see video). Now, insert your finger into the hole near the knob, which is …
Where to Find the Fuse Boxes of the Peugeot 206
Where to Find the Fuse Boxes of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, we can see where the fuse boxes of the Peugeot 206 are located: the one for the cabin is found at the bottom of the dashboard, under t…
Location of the fuse boxes in the Peugeot 206
Location of the fuse boxes in the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video we can see the position and diagram of the fuse boxes of the Peugeot 206: We find the first box in the passenger compartment, on the le…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos