Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 5008
    4. : What is the fuse diagram for the Peugeot 5008?

Peugeot 5008 - Video tutorial

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Fuse box
Operation: What is the fuse diagram for the Peugeot 5008?

In this video, we can see where the fuse boxes are located in the Peugeot 5008 and what their respective diagrams are, which is useful in case we need to check the fuses of a malfunctioning device. We find the first box inside the cabin, precisely behind the door located in the lower left area of ??the dashboard, on the driver's side. The second box is instead positioned inside the engine compartment, below the black plastic cover next to the battery. Make sure to replace faulty fuses with replacements of the same amperage.


Posted on 16 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 5008 2009-2016 - What is the position of the fuse box of the Peugeot 5008? Read Answer
    • 5008 2017-2024 - Where is the Peugeot 5008 trunk lid fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos