Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel and Hinge of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

This guide shows you how to remove and replace the front door panel and door hinge of the Peugeot 206. First, open the front door and start unscrewing all the fixing screws found on the sides and on the plastic cover of the grab handle; also remove the triangular plastic cover, as shown in the video. At this point, pry the sides of the panel to detach and remove it, disconnecting the handle cable; then you can proceed to dismantle and replace the hinge, following the video tutorial to the end!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
Peugeot 206 (1998-2012 / MK 1) Replace the door panel if it is not repairable on a Peugeot 206. Remove the driver's left panel. Take off the frame of the door opening lever and det…
Peugeot 206 (1998-2012 / MK 1) Before you start, open the door of your Peugeot 206. Begin by prising off and removing the internal handle trim. Next, unscrew and remove all the scr…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos