Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

To replace the right front headlamp bulb (H4 fitting), which is on the passenger side, open the bonnet and pull out the windscreen washer reservoir filler tube by simply pulling it upwards. Next, remove the protective cap located just behind the headlamp by releasing the securing tab, disconnect the power connector from the bulb, and unclip the spring that holds it in place. Then, extract the old bulb and insert the new one, ensuring it is oriented correctly, before securing it with the spring and reconnecting the power connector.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulb on a Peugeot 206
How to Replace the Bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the front headlight bulbs on a Peugeot 206 is a simple task that can be done independently. Start with the left headlight bulb. First, remo…
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To correctly complete the replacement of the headlight bulb of your Peugeot 206, you must pay attention to the steps described below and then put the…
Replacing the Headlight Bulb on the Peugeot 206
Replacing the Headlight Bulb on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, you will learn how to remove and replace the headlight bulb, both main and dipped beam, on the Peugeot 206 in simple steps. First, ope…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos