Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : How do you set the clock on the Peugeot Expert?

Peugeot Expert - Video tutorial

Model: Peugeot Expert Mark3, MK 3 - Years 2016-2024
Part: Checks and maintenance
Operation: How do you set the clock on the Peugeot Expert?

To set the clock on the Peugeot Expert, you need to turn on the instrument panel and then press the SET 000 button located in the center of the panel itself. This way, you will be able to navigate within it and select the "Hours" and "Minutes" options. Once one of these options has been selected, you can respectively adjust the hours and minutes using the + and - buttons, which are also located in the center of the instrument panel. Once the desired time has been correctly entered, you can return to the initial screen and see that the modification has been made.


Posted on 12 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Expert 2016-2024 - Why did the AdBlue warning light come on in the Peugeot Expert van? Read Answer
    • Expert 2016-2024 - In the past, probable problems with the engine of the Peugeot Expert have been highlighted? Read Answer
    • Expert 2008-2016 - How do you set the time on the Peugeot Expert? Read Answer
    • Expert 2016-2024 - How do you reset the adblue light in the Peugeot Expert? Read Answer
    • Expert 2016-2024 - What happens if the pressure sensor on the Peugeot Expert breaks? Read Answer
    • Expert 2016-2024 - What does the AdBlue warning light on the Peugeot Expert indicate? Read Answer
    • Expert 2008-2016 - How to reset the "Service" warning light on a Peugeot Expert? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos