Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diesel Filter Replacement Instructions

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Diesel fuel filter

Keeping the diesel filter clean and efficient is essential to avoid contaminating the pump and injectors; replacing it is extremely simple: once the front bonnet is opened and the engine cover removed, the filter is located at the front of the engine. Start by draining the bowl through the designated drain screw at the bottom, disconnect the inlet and outlet pipes, and unscrew the cap to extract the old filter. Clean the inside of the bowl, insert the new filter and the new seals provided, screw the cap and drain screw back on, and then reconnect the pipes. Ensure to fill the filter before starting the engine.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Diesel Filter Replacement Instructions
Diesel Filter Replacement Instructions
Peugeot 206 (1998-2012 / MK 1) The diesel filter is of the cartridge type and is located at the front of the engine: open the bonnet, remove the plastic cover on the engine, and lo…
Instructions for Replacing the Diesel Filter
Instructions for Replacing the Diesel Filter
Peugeot 206 (1998-2012 / MK 1) To replace the diesel filter, first remove the plastic engine cover and locate the filter at the front of the engine. Completely unscrew the drain sc…
How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI
How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI
Peugeot 206 (1998-2012 / MK 1) Today's instructions will show you how to remove and replace the diesel filter on a Peugeot 206 2.0 HDI in simple steps. First, open the bonnet of th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos