Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the coolant temperature sensor on the Peugeot Partner

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine coolant temperature sensor

See other generations:
Video tutorial

Today's guide will show you the procedure for removing and replacing the coolant temperature sensor on the Peugeot Partner. First, open the bonnet and start by removing the battery, unscrewing the bracket screw and disconnecting both battery terminals (positive and negative); then disconnect the electrical connector of the temperature sensor by releasing the clip to remove it, as shown in the video.

At this point, install the new temperature sensor, reconnecting it and then checking its operation!


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, learn how to replace the timing belt on a Peugeot Partner 1.6. Before starting, open the front bonnet of your Peugeot Partner. Begi…
How to replace the cabin air filter of the 2019 Peugeot Partner
How to replace the cabin air filter of the 2019 Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) Below we will discover together the steps you need to follow in order to correctly replace the cabin air filter in your Peugeot Partner Mk3 (2019). F…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos