Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle and Repair the Boot Lock on a Peugeot

Model: Peugeot Peugeot Various
Part: Door lock

In this video, you will see how to dismantle the lock on the rear door of a Peugeot vehicle for repair. First, open it from the inside to lift the tailgate, then try to remove the cover that secures the plastic part to the metal part of the tailgate. Once the tailgate is separated, remove the screws from the lock, pull it inward, and reach in from the back to take out the lock. You will need to disconnect the electrical contacts, and now the lock is free for bench work. Remove the fixing screws to access the lock mechanism. Here, you will find the damaged part. It is a metal component shaped like a "U", a piece not available commercially, which you will need to fabricate from a piece of iron wire, as shown in the video. Once the piece is realigned, you will see that the lock starts functioning again. After verifying its functionality, you can close the cover and replace the lock. Reconnect the electrical connectors and reposition it in its housing. Reassemble the two halves of the tailgate. Operation complete.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Peugeot Various Today we will explain how to replace the third brake light on a Peugeot vehicle. To perform this operation, we need to open the trunk of the car and …
Peugeot Peugeot Various In this video we see in detail how to repair a Peugeot key, but to do this repair we need some knowledge of electronics, because we have to remove th…
Peugeot Peugeot Various In this video, discover the main hidden features of a Peugeot car key. By holding down the unlock button, the windows will automatically lower, while…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos