Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

Video tutorial

Removing the door panel of a Peugeot 206 is a very simple operation that can be done in a few quick steps. The first step is to insert a flathead screwdriver into the sides of the handle cover to remove it. The second step is to remove the upper side cover of the window.

The third step is to unscrew the three screws that secure the panel; specifically, the screws are located: inside the handle, on the side, and under the window switch. Once the screws are removed, you can proceed to the final step.

The fourth step involves removing the panel by pulling it outwards.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
How to Remove the Door Panel of a Peugeot 206
How to Remove the Door Panel of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you start, open the door of your Peugeot 206. Begin by prising off and removing the internal handle trim. Next, unscrew and remove all the scr…
How to Remove the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you begin, open the front door of your Peugeot 206. Start by uncliping and removing the internal cover located near the rearview mirror, then …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos