Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Service warning light

In this tutorial, you will see how to reset the service light on a Peugeot 208, a very simple and quick operation that should only be done after completing all scheduled maintenance tasks. First, enter the cabin, then insert the key but leave it in the initial position. Next, press and hold the button located in the centre of the dashboard, turn on the ignition simultaneously, and keep the button pressed for the duration of the countdown displayed. Afterwards, restart the vehicle and check that the reset was successful.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) Good morning, today's goal is to reset the maintenance light on our Peugeot 208. Let's start by turning on the car and making sure the display shows …
How to reset the service on the Peugeot 208
How to reset the service on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) These short and simple instructions will allow us to reset the service light for the regular maintenance of the engine oil change on the Peugeot 208.…
How to Reset the Service Light on a Peugeot 208?
How to Reset the Service Light on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To reset the service light on a Peugeot 208, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, press and…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos