Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Indicator on a Peugeot 2008

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Warning light – error code

To reset the service indicator on a Peugeot 2008 (2022 model), follow these steps: Insert the key into the ignition and turn it to the "ON" position without starting the engine. Press and hold the trip odometer button on the instrument panel. While holding the trip odometer button, turn the key to the "OFF" position. Release the trip odometer button. Turn the key back to the "ON" position without starting the engine. The service light should start flashing. Press and hold the trip odometer button again until the maintenance light stops flashing and resets. This process may take a few seconds. Release the trip odometer button. Start the engine and check that the service light has been reset.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the Peugeot 2008?
How to reset the service on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In this tutorial, we can see how to reset the service in the Peugeot 2008, an extremely simple and quick operation, to be carried out only once all s…
How to reset the service in the Peugeot 2008?
How to reset the service in the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) Resetting the service in the Peugeot 2008, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must hav…
How do you reset the Service light on the Peugeot 2008?
How do you reset the Service light on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) The Service spy that appears on the instrument panel of the Peugeot 2008 can be reset by holding down the button located at the end of the lever on t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos