Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to reset the oil service on the Peugeot 208?

Peugeot 208 - Video tutorial

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Engine oil
Operation: How to reset the oil service on the Peugeot 208?

In this tutorial we can see how to reset the oil service in the Peugeot 208, an extremely simple and fast operation, to be carried out only once the scheduled maintenance work required has been completed. Let's start by going inside the cabin, then insert the key but leave it in the first position. Then press and hold the button depicting a wrench, located in the center of the dashboard, and simultaneously turn on the instrument panel. Keep the button in this position for the entire duration of the countdown displayed.


Posted on 21 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 208 2019-2026 - Why did the oil light turn on in the Peugeot 208? Read Answer
    • 208 2019-2026 - What is the amount of engine oil needed for replacement on a petrol Peugeot 208? Read Answer
    • 208 2019-2026 - What to do if the engine oil light comes on in Peugeot 208? Read Answer
    • 208 2012-2019 - How much oil does it take for a Peugeot 208 1.6 HDI? Read Answer
    • 208 2012-2019 - How much does a Peugeot 208 service cost? Read Answer
    • 208 2012-2019 - How much does it cost to change the oil and filter of the Peugeot 208? Read Answer
    • 208 2012-2019 - How much does the first service cost of the Peugeot 208 1.2? Read Answer
    • 208 2012-2019 - After how many km must the Peugeot 208 be serviced for the first time? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos